Skip to main content Skip to navigation

Nickel-Safe Ice Machine Cleaner

  • Rapid scale remover
  • Highly concentrated
  • For use in food areas
  • OEM Approved
  • Formulated for use in all makes and models
    of ice makers, including those with nickel
    and tin-plated evaporaters
  • Functional in cubers, flakers, drum, and tube
    machines
  • NSF Registered

Description:

Nickel-Safe Ice Machine Cleaner is a specially formulated
citric/phosphoric product for removing scale deposits from
ice makers having nickel-plated or tin-plated evaporators.
In fact, it was the industry’s first nickel-safe product,
introduced in collaboration with Manitowoc. Usage rate
should be in accordance with the manufacturers instructions
or 5 fluid ounces with one gallon of system water. As the
water is frozen into ice during an ice maker’s cycle, the
naturally occurring dissolved minerals in the water, some
of which can combine to form lime scale, remain behind in
the unfrozen recirculating ice water simply because water
tries to freeze in its pure state. As the cycle continues and
more water is made into ice, the minerals over concentrate
and eventually precipitate as a lime scale deposit. As the
scale begins to form, it creates a physical obstruction that
results in: plugged distribution holes, restricted water flow
and eventually the ice maker will hang-up or jam. Ice harvest
is reduced and eventually the machine will shut down,
requiring service. Once the machine is scaled up, it must be
cleaned, requiring the use of an acid so that the scale can be
dissolved. The acid must be effective in order to dissolve the
scale but it must also be food and equipment-safe.

Packaging Size Part Number Additional Info
55 gallon drum 4287-01
16 oz bottle 4287-34
3.78 liter bottle (Canada) 4841-08
473 ml bottle (Canada) 4841-AB
1 gallon bottle 4287-08

Directions:

This product must be used in accordance to the following directions by HVACR professionals only.

  1. 1. Turn off refrigeration, shut off water supply and remove
    ice from bin.
  2. Remove water trough, water curtain(s), water distribution
    tube(s) and other parts that may be scaled with
    deposits.
  3. Mix 3 oz. Nickel-Safe Ice Machine Cleaner per gallon of
    warm water in plastic container and place components
    in solution. Soak the components until they are free
    of deposits; for stubborn or thick deposits use a soft
    brush to help the dissolving action.
  4. Use above solution to clean storage bin, top, bottom
    and side extrusions and other components where
    deposits have collected, then rinse cleaned areas with
    fresh water.
  5. Replace cleaned components and turn on water.
  6. To clean evaporator as well as the remaining recirculating
    water system, add Nickel-Safe to the water in ice maker
    according to the manufacturer’s instructions. If none
    are available, use 5 fl. oz. of Nickel-Safe per gallon of
    water in the machine.
  7. Allow cleaning solution to circulate for up to 10 minutes;
    it may be necessary to recirculate the solution for longer
    than 10 minutes to remove heavier and thicker scale
    deposits. Be sure all distribution and weep holes are clear.
    Drain cleaning solution and flush with fresh water for a
    minimum of 30 seconds. After flushing, plug the drain.
  8. Thoroughly rinse bin with clean water after all
    components are cleaned.
  9. Return machine to service; discard first batch of ice.

Product Information:

Literature Downloads

Download the product bulletin and other relevant literature here.

Labels

Download a low resolution file of the product label here.

Product Safety

RTK Information

2611 Schuetz Rd. St. Louis, MO 63043
  • Telephone: 800.554.5499
  • Email: [email protected]
  • Hours: Mon–Fri: 8:00am - 5:00pm (Central Time)

We'd love to hear from you.

We'd love to hear from you.

Click the box to submit